battery & coil operated ignition

 Battery and coil-operated ignition

With the universal adoption of electrical starting for automobiles, and the availability of a large battery to provide a constant source of electricity, magneto systems were abandoned for systems which interrupted current at battery voltage, using an ignition coil to step the voltage up to the needs of the ignition, and a distributor to route the ensuing pulse to the correct spark plug at the correct time.

The Benz Patent-Motorwagen and the Ford Model T used a trembler coil ignition system. A trembler coil was a battery-powered induction coil; the trembler interrupted the current through the coil and caused a quick series of sparks during each firing. The trembler coil would be energized at an appropriate point in the engine cycle. In the Model T, the four-cylinder engine had a trembler coil for each cylinder; a commutator (timer case) delivered power to the trembler coils. The Model T would be started on battery but then switched to an alternator.

An improved ignition system was developed by the Dayton Engineering Laboratories Co. (Delco) and introduced in the 1910 Cadillac. This ignition was developed by Charles Kettering and was a wonder in its day. It consisted of a single ignition coil, breaker points (the switch), a capacitor (to prevent the points from arcing at break) and a distributor (to direct the spark from the ignition coil to the correct cylinder).

The points allow the coil magnetic field to build. When the points open by a cam arrangement, the magnetic field collapses inducing an EMF in the primary that is much larger than the battery voltage and the transformer action produces a large output voltage (20 kV or greater) from the secondary.

The capacitor suppresses arcing at the points when they open; without the capacitor, the energy stored in the coil would be expended at an arc across the points rather than at the spark plug gap. The Kettering system became the primary ignition system for many years in the automotive industry due to its lower cost, and relative simplicity.